Rotary Table Diameter :150 mm (6″) Overall Height : 80 mm ( 3-1/4″) Center Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that; the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Re-settable Dial & Hand wheel graduated in seconds. Vernier scale is calibrated to 10 seconds. Center Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Supplied with an adjustable Tail-stock for a total Indexing solution. Safety & Operation manual is also supplied.

Rotary Table Diameter :150 mm (6″) Overall Height : 80 mm ( 3-1/4″) Center Height in Vertical Position: 105 mm Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Re-settable Dial & Hand-wheel graduated in seconds. Vernier scale is calibrated to 10 seconds. Centre Bore of the Table: 2 MT 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Set includes a M8 Clamp Kit This will fit both the Horizontal & Tilting model of HV4 & HV6 Rotary Tables This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut 2 x clamps Bolt Thread M8

Specifications of 4″ (100 mm) Rotary Table:- Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16″ (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. ​Specifications of Round Vice:- Made of high grade close grain caste Iron. Designed to fit our 4″ (100 mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement. Prod. Code Dia. of Base Jaw Width Jaw Depth Jaw Opening Height MRV-105105 mm77 mm21 mm40 mm32 mm

3 Inches (75 mm) Tilting Rotary Table to tilt between 0- 90 Degrees & can be locked at any position. Table Diameter – 3 Inches (75 mm) Height – 47 mm Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Can be used both in horizontal & vertical position.

3″ (75 mm) Small Mini Rotary Table-4 SLOTS Supplied with ER16 Collet Adaptor SIZE: 3”INCH ROTARY TABLE DIAMETER 3″-75 MM HORIZONTAL / VERTICAL CLAMPING 1-5/8″ CENTRE HEIGHT IN VERTICAL POSITION, THUS LOW PROFILE APPROX 80 MM WITH COLLET ADAPTER MOUNTED * SEE THE PICTURE TABLE CALIBRATED 0-360 DEGREES TABLE 36-1 RATIO, WHICH MEANS ONE TURN OF THE HANDLE ROTATE 10 DEGREE OF THE TABLE. ENABLE THE USER TO DRILL OR CUT ANY WORK AT AN EXACT INTERVAL AROUND A FIXED AXIS (GENERALLY VERTICAL OR HORIZONTAL) THE BASE PLATE OF THE ADAPTER IS DRILLED IN A MANNER THAT IT CAN FIT BOTH 3 AS WELL 4 SLOT ROTARY TABLE.

Horizontal & Vertical Rotary Table 4″.3 Slots Table height 66 mm in flat position Table graduated 360 degrees in 5 degree divisions Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mm The table tilts upto 90 degrees and can be used anywhere. ​Specifications of Round Vice Made of high grade close grain caste Iron. Designed to fit our 4″ (100 mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement.

Horizontal & Vertical Rotary Table 4″. Table height 66 mm in flat position Table graduated 360 degrees in 5 degree divisions Base is 145 mm x 126 mm with two 10 mm mounting holes separated by 110 mm The table tilts upto 90 degrees and can be used anywhere. ​Specifications of Round Vice Made of high grade close grain caste Iron. Designed to fit our 4″ (100 mm) Rotary Tables perfectly. The moving jaw has V-grooves to hold Round objects. Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table. The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement.